Name *  
City / State Zip / Postal Code
Country *  

Work Phone/Mobile *  

( Country Code - Area Code - Phone Number)
Email *  
Your Requirements *  
   
 
   

Dryspell Desiccant Dryers

Dryspell Desiccant Compressed Air Dryers

Moist air from the compressor is sent through the coalescing filter. Here water & oil coalesces, gets purged through the auto drain valve. Desiccant Compressed Air Dryers offers total cleaning solution for lubricated and non-lubricated compressed Air products.

Dryspell

  • Microprocessor Controller.
  • Prerfilter rating 0.3 microns (coalescer).
  • Shuttte valve for Low Pressure drop.
  • AH Aluminium resist curidatinn & scale formation.
  • Dewpoint better than -400 C.
  • Design Patented.

Desiccant Dryer offers total cleaning solution for lubricated as well as non-lubricated compressed Air.

Dryspell Desiccant Dryers
  • Pre-filter
  • Inlet shuttle valve
  • Exhaust valve
  • Desiccant tower
  • After filter
  • Outlet shuttle valve

Principle of Operation

Drying Cycle : Moist air from the compressor is sent through the coalescing filter. Here water & oil coalesces, gets purged through the auto drain valve.

The relatively clean at with water vapour passes through the aluminium drying tower filled desiccant gets completely dried (upto ­ 400C dew point) and then passes through a built in after filler The desiccant fines from the towers are completely removed and clean dry air is let out through the outlet port for use.

Regeneration Cycle : During the regeneration cycle. The sudden depressurisation brings out water molecules trapped in the Desiccant pores to the surface of the beads, A small portion dry compressed air from the drying TOWER then passes Over the desiccant through the regeneration orifice built in the Top Block. This results in complete regeneration of the desiccant.

Typical Application

Dryspell Desiccant Dryers
Dryspell Desiccant Dryers
  • Paint spray booths.
  • Tool, Valve, Cylinder protection.
  • Food packaging machine.
  • Auto Garage.
  • Textile & Garments.
  • SPM.
  • Instrumentation.

Specifications

  • Maximum Working Pressure - 16 kg / cm2.
  • Air Inlet Condition - Maximum Fluid Temperature 450C.
  • Pre-filter rating - 0.3 Microns (Coalescer).
  • Cycle Time - 4 Minutes.
  • Regeneration Volume - 10%.
  • Air Outlet Conditions - Dry air at -400C Dew Point.
  • Operating Voltage - 85 - 265 V 50 / 60 hz l Ph.
Model Flow cfm End Connection BSP Dimensions (mm) Weight Kgs Recommended Accessories
Height Width Depth Pre filter (1) Post filter (2)
Dryspel 5 5 1/2" 390 280 200 9 G 24 P G 24 Y
Dryspel 10 10 1/2" 600 280 200 11 G 24 P G 24 Y
Dryspel 20 20 1/2" 1015 280 200 16 G 100 P G 100 Y
Dryspel 30 30 1/2" 810 350 260 28 G 100 P G 100 Y
Dryspel 45 45 1/2" 1055 350 260 34 G 100 P G 100 Y
Dryspel 60 A 60 3/4" 1250 350 285 43 G 100 P G 100 Y
Dryspel 100 100 1" 1540 415 300 81 G 250 P G 250 Y